Services
excavated from the stormwater retention area, and to provide design parameters for the
proposed stormwater retention pond system.
excavated from the stormwater retention area, and to provide design parameters for the
proposed stormwater retention pond system.

Threshold Inspections: Conduct Threshold Inspection Services per the Florida Statue 553 and Engineer of Record’s Threshold Inspection Plan; provide comprehensive documentation for quality issues and note the corrective actions that were taken.


Geotechnical: Hand auger borings, de-grubbing/de-mucking inspections; collection of soil samples for lab analysis, proof-rolling inspections, in-place density testing (site & buildings); monitoring of helical & auger cast pilings.

 

Concrete: Reinforcement inspections including rebar, anchor bolts, embeds for footings, tie columns/beams, slab/elevated decks, tilt panels, formed walls & custom features; sampling of approved mixes including slump, strength specimens, air content, temperature & unit weight; monitoring concrete placement for correct mix designs, placement/consolidation.

 

Masonry: Inspection of vertical/horizontal reinforcement, cell & cleanout cleanliness, control joint placement, hurricane clip installation.

 

Structural Steel: Heavy gauge/light gauge framing connections including bolts, screws, welds, PAFs, post installed anchors; decking for elevated decks & roofs; joists & girders, including bridging, bracing, opening frames, & attachment to structure.

 

Roofing: Inspections include TPO, tile, shingle, and sheet metal systems including underlayment’s, terminations, transitions and penetrations. 

Additional Services: Shoring/reshoring, wood framing & nail/screw patterns, sheathing, steel hold down straps, post tension concrete, paint thickness inspections; fireproof inspections; stucco inspections; H-Pile driving monitoring; structural assessments; settlement inspections; handrail inspections; canopy inspections, asphalt inspections, and high-pressure window testing; Non-destructive examination and testing of welds.

Certifications
•  Professional Engineer
•  Florida Standard Inspector
•  Special Inspector (Threshold)
•  Bachelor of Science in Civil Engineering
•  Certified Welding Inspector
•  Structural Masonry Inspector
•  ACI Level I & II
•  Nuclear Moisture Density Gauge Operator
•  CMEC & FDOT Certified Lab